Small excavator gear operation tutorial, small excavator should not be too sharp when walking and turning. If the curve is too large, it should be turned in stages, within 20° each time. When loading and unloading the small excavator, it should be directed by an experienced loader. During the loading and unloading process, the small excavator is strictly prohibited from turning or turning on the slope. If a dangerous situation occurs during loading, the bucket can be lowered to assist with braking, and then the small excavator can slowly retreat.
The country's continued development, especially the real estate boom, and construction projects everywhere have increased the demand for small excavators.
The wheelbase of the small excavator track on the ground is always greater than the wheelbase, so forward working stability is good, and sideways operation should be avoided as much as possible; the excavation point should be kept close to the machine to improve stability; if the excavation point is far away from the machine, it will cause Because the center of gravity moves forward, the operation will be unstable; lateral excavation is less stable than forward excavation. If the excavation point is far away from the center of the machine body, the machine will be more unstable. Therefore, the excavation point and the center of the machine body should be kept at an appropriate distance to ensure balanced operation. Efficient.
The excavator should not be too sharp when turning. If the curve is too large, it should be turned in batches, within 23° each time.
Using a small excavator bucket to excavate rocks will cause great damage to the machine and should be avoided as much as possible; when excavation is necessary, the position of the machine body should be adjusted according to the crack direction of the rock so that the bucket can be shoveled in smoothly for excavation; turn the bucket teeth Insert into the rock cracks and use the digging force of the bucket and bucket to excavate (pay attention to the slippage of the bucket teeth); the unbroken rock should be broken first and then excavated with the bucket.
Small excavators usually refer to excavators under 6 tons, with a width generally less than 1.2 meters. They have very good traversability and are flexible. Basically, they can pass freely in small environments. They can basically be used in greenhouses, gardens, fruit trees, tea gardens, etc. It is more convenient to perform various operations in the environment.