banner-pc banner-m

Under what circumstances will the excavator overturn?How to deal with the engine after the excavator

Release Date:06.24.2023 Views: 329

Now the small excavator is very popular,but many people are curious,the small excavator is so light,will it roll over when it is used,then the question is,under what circumstances will the excavator turn over?

Under what circumstances will the excavator overturn?

The excavator may tip over under the following conditions:

Unstable ground:When the excavator is working on uneven ground,it may fall over.This includes soft soil or muddy ground,or slopes that slope too steeply.

Overload:When the excavator is overloaded,the center of gravity will become unstable,which increases the risk of tipping over.The operator must ensure that the weight and load of the excavator are within the specified range.

Operator error:The tipping risk of an excavator can also be affected by operator error.For example,an operator may work on unstable ground or forget to lower the excavator arm while moving.

Improper Maintenance:Improper maintenance of an excavator can also lead to a tip-over accident.For example,if the hydraulic system fails,it can cause the excavator to lose balance.

To reduce the risk of excavator tipping over,operators should receive professional training and follow safe operating procedures.In addition,the excavator should be maintained and inspected frequently to ensure that it is running in good working condition.

How to deal with the engine after the excavator rollover?

If the excavator has a rollover accident,it is necessary to inspect and repair the excavator on the premise of ensuring the safety of personnel.During inspections and repairs,the condition of the engine requires special attention.Here are some considerations for handling the engine:

Shutting down the engine:First,the engine needs to be shut down and all wires and cables unplugged.This prevents any electrical faults or short circuits.

Check for fluid leaks:Check for any fluid leaks around the engine,such as fuel,coolant,or hydraulic oil.If there is a leak,it needs to be cleaned up and repaired as soon as possible.

Check engine mounts:Inspect engine mounts and support points for damage or deformation.If damaged,it needs to be replaced immediately.

Check the suction system:Check the suction system for any foreign objects or dirt.If there is,it needs to be cleaned up.

Check the Exhaust System:Check for any damage or deformation in the exhaust system.If there is,it needs to be replaced.

Check the electrical system:Check for any damage or shorts in the electrical system.If present,it needs to be repaired or replaced.

Replacing the filter:If the engine has been upside down for a while,it may cause impurities in the oil to enter the filter.Therefore,the filter needs to be replaced.

In short,when dealing with excavator rollover accidents,special attention should be paid to the condition of the engine,and inspection and repair should be carried out when necessary.At the same time,before any maintenance work,it is necessary to ensure that the excavator is stable and take necessary safety measures to protect the safety of maintenance personnel.


previous:How to install the remote control excavator battery? What is the difference between 6-way and 8-way

next:How to deal with the high temperature of small excavators in summer

Latest Articles