How to reduce the high water temperature of a small excavator Release Date:06.06.2024 Views: 149 The high water temperature of a small excavator is a very common problem. If it is not handled, it may cause machine failure or even endanger the safety of the operator. Therefore, we need to take some measures to reduce the water temperature of the small excavator. Here are some feasible methods.1. Check the radiator: The radiator of a small excavator is one of the important factors affecting the water temperature. Therefore, the radiator should be checked regularly for damage or blockage, and the dust and debris on the surface of the radiator should be cleaned. This can enhance the heat dissipation efficiency of the radiator and thus reduce the water temperature.2. Replace the coolant: The function of the coolant is to reduce the engine temperature when the engine is running. Over time, the additives and corrosive substances in the coolant will gradually reduce the effect of the coolant. Therefore, we should replace the coolant regularly and use high-quality coolant.3. Add more water: During the operation of the small excavator, water can be added to the water tank at the right time to increase the water consumption of the radiator and achieve the purpose of cooling. It is recommended that the amount of water added should not exceed 1/3 of the water tank volume.4. Check the water pump: The function of the water pump is to make the coolant flow. If the water pump fails or has been used for too long, it may cause poor flow and affect the heat dissipation effect of the small excavator. Therefore, it is necessary to regularly check whether there is a problem with the water pump and solve it in time.5. Fan cleaning: The function of the fan is to make the air around the radiator flow, thereby increasing the heat dissipation efficiency of the radiator. After the small excavator is operated, the dust and debris on the surface of the fan should be cleaned to improve the heat dissipation efficiency.Lowering the water temperature of the small excavator is an issue that we need to pay attention to. During the use of the small excavator, we should regularly check the machine, replace the coolant, add water, check the water pump and clean the fan to ensure the heat dissipation effect of the machine and increase the life of the small excavator. previous:The micro excavation market has entered a period of rapid development next:Mini excavator manufacturer price Latest Articles Crushing requirements for cr··· Understanding the Lifting Ca··· Does Kubota make a good mini··· Can a Mini Digger Fit Throug··· Guide to the use of small ho··· Size and specifications of m··· How much does it cost to buy··· Uses of small excavators Specifications,models and pr··· Ranking of the ten most dura···