When our small excavators need to switch sites, people must transport the small excavators to the destination station. Our small and medium-sized crawler excavators are not a kind of equipment that can walk on the ground for a long time, because it will damage to the equipment. Therefore, it is necessary to carry out lifting and loading to the destination station during transportation, but in this link, there are many things that we need to pay special attention to, so we need to pay special attention to it. Jinwang Machinery will share with us the relevant common question.
Before the small excavator needs to be transported, we must first lift the small excavator for loading. During the lifting process, no one on the excavator must ensure that the wire rope we hoist can withstand the weight of the excavator. At the same time, we are lifting Once the core of the small excavator is unstable, it will rotate in the rising stage. In the lifting link, run the car engine to rotate the upper part of the rotating body. At this time, the work clothes equipment of the small excavator will be on the road, and the wire rope will be worn on the front axle assembly of the small excavator and the rear axle of the car.
The following is the loading of the small excavator. In the loading process, first place the small excavator to the specified position, then shovel down the bulldozer, activate the administrative mechanism, pull out the key, and then let the bucket and the bean curd cylinder all work together. The stability of the small excavator is maintained like the extended and lowered boom, and it is impossible to roll over during the transportation process. When loading and transporting, pay attention to placing the wooden squares at the position of the bucket and the hydraulic cylinder to avoid damage to the car body during the transportation process.
When the small excavator is transported to the place, it must be unloaded. When unloading, everyone should pay special attention to the low-speed operation of the generator set of the small excavator and the slow movement to keep the trailer and the small excavator. A certain distance depends on the steep slope or platform to load and unload the small excavator. Do not change the orientation during the unloading process. If you want to change the direction, you must come out of the slope and then correct the orientation. Such careful use is to prevent the small excavator from being damaged and ensure the safety of our operators.