banner-pc banner-m
Backhoe Load - KVL70
Backhoe Load - KVL70
Backhoe Load - KVL70
Backhoe Load - KVL70
Backhoe Load - KVL70

Backhoe Load - KVL70

The shovel-digging machine is commonly known as “busy at both ends”. It can perform two-end operations, one end for excavation operations, and the other end for loading and shoveling operations.

Length:5600mm Height:2750mm Weight:4200kg Engine Power:58KwW/80hp Wheelbase:2315mm
  • Selling point
  • Configuration
  • Video Introduction
  • Relevant
  • Online message
We Accept:
Backhoe Load - KVL70

The shovel-digging machine is commonly known as “busy at both ends”. It can perform two-end operations, one end for excavation operations, and the other end for loading and shoveling operations.

Length:5600mm Height:2750mm Weight:4200kg Engine Power:58KwW/80hp Wheelbase:2315mm
  • excavator_top_big_picture.jpg
    场景图.jpg场景图2.jpg
    场景图3.jpg场景图4.jpg

    Cab

    Enlarged cab, safety glass, spacious and bright, movable seat, allowing you to facilitate the conversion operation of digging and loading, simple and flexible.


    驾驶室.jpg
    方向盘.jpg

    Operation Handle

    The coherent compound action one-to-two operation handle is simple and easy to operate, fully meeting your needs!

    Load the Bucket

    It is used for filling and excavation of roadbed engineering, aggregate and charging of asphalt mixture and cement concrete yard. In addition, it can also carry out operations such as pushing soil, scraping the ground and pulling other machinery. Because the loader has the advantages of fast operation speed, high efficiency, good maneuverability, and easy operation, it has become one of the main types of earthwork construction in engineering construction.


    推土铲.jpg
  • MODELKV70
    WEIGHT
    Total weight4200kg
    SIZE
    Bucket capacity0.7m³
    total length 5600mm
    total transport height2650mm
    Vehicle width1850mm
    Total Weight4000kg
    tire width23.5-16
    Excavator rotation angle180°
    wheel tread1500mm
    wheelbase2315mm
    Bucket maximum capacity0.5m³
    Minimum ground clearance260mm
    Minimum radius of gyration1900mm
    Maximum grade30°
    DRIVE
    Engine speed2200r/min
    engine power58KwW/80hp
    hydraulic system pressure16Mpa
    WALKING CHARACTERISTICS
    Working device modeBack Hole
    fastest walking speed35km/h
  • excavator_top_big_picture.jpg
    场景图.jpg场景图2.jpg
    场景图3.jpg场景图4.jpg

    Cab

    Enlarged cab, safety glass, spacious and bright, movable seat, allowing you to facilitate the conversion operation of digging and loading, simple and flexible.


    驾驶室.jpg
    方向盘.jpg

    Operation Handle

    The coherent compound action one-to-two operation handle is simple and easy to operate, fully meeting your needs!

    Load the Bucket

    It is used for filling and excavation of roadbed engineering, aggregate and charging of asphalt mixture and cement concrete yard. In addition, it can also carry out operations such as pushing soil, scraping the ground and pulling other machinery. Because the loader has the advantages of fast operation speed, high efficiency, good maneuverability, and easy operation, it has become one of the main types of earthwork construction in engineering construction.


    推土铲.jpg
  • Configuration

    Total length

    5600mm

    total height

    2750mm

    Vehicle width

    1850mm

    working weight

    4200kg

    hydraulic system pressure

    19MPa

    Maximum excavation height

    4500mm

    Bucket capacity

    0.10m³

    tire width

    23.5-16

    Excavator rotation angle

    180°

    wheel tread

    1500mm

    wheelbase

    2315mm

    Bucket maximum capacity

    0.7m³

    Minimum ground clearance

    260mm

    fastest walking speed

    35km/h

    Maximum grade

    30°

    engine power

    58KwW/80hp

    System pressure

    16Mpa



  • Video Introduction
  • Relevant
Online message